Valentine One Review | Valentine One Radar Detector Reviews

 
 
 
 
 
 

Although the Valentine One has been introduced since 1992, it has been constantly updated to keep up with time and is considered one of the highest performing radar detectors on the market.

The great performance can be attributed to the multiple radar antennas in Valentine One (V1) – one forward facing and the other rear facing antenna. By this combination of antennas, the V1 effectively tells you the band and strength of the radar signal, along with the number of “bogeys,” or radar units being detected. It will also tell you what direction the signal is coming from, and provide the best rear detection out of every other windshield-mounted detector on the market.

In this Valentine One review, we’ll be looking at the features that make this radar detector great, customer ratings and reviews, the pros and cons and our verdict on this detector.

Valentine One Review

 

 

 

 

Valentine One Review

Radar and Laser Coverage

Valentine One radar detector reviews

Click to enlarge image

 

The V1 basically covers all radar (X, K and Ka band) and laser (POP and all lasers) used by the law enforcement agency in U.S.

Editor’s Note: For details on how to select a radar detector, read about our Radar Detector Guide.

Signal Direction

Perhaps one of the greatest strength of the Valentine One is the ability to point to the direction of the radar.

For example, whenever a signal is detected, the arrow will either point to the front, rear or to the side to indicate the source of signal. This is a great feature as you’ll instantly know where the signal is from and take appropriate action.

Multiple Signal Detection 

Valentine One radar laser detector review

Valentine One is able to track multiple threats (bogeys), up to 9 signals, at one go. Let’s look at some examples below:-

Example 1: Let’s say your detector is in full alert, then you see a radar unit. Naturally you assume the radar you saw is the cause of the alert. But what if there’s another radar unit just up the road waiting for you?

Example 2: Let’s say you’re in an alert caused by a known X-band burglar alarm. What if a radar operator, using Instant-on, is simultaneously working the same territory?

In both cases, an ordinary radar detector would set you up for a big surprise because it would lead you to believe that only one bogey was out there. Valentine One is your insurance against surprises. It always tells you how many.

When a signal is detected, an alert tone will be heard and if new threat has been detected, the V1 will lock to that additional threat and will notify you with the Bogey Lock tone (“Dee-Deet”). This sound will never be heard at any other time, not even during the power-on ritual. Whenever you hear this sound, it means that another threat has been detected and is being tracked. The bogey counter shows the number of bogeys / signals being tracked at that time.

Volume Control

Turn the volumes knob to switch on the unit and then adjust the volume according to the level acceptable to you. The will be the initial volume you hear once a signal has been detected. You can also set the reminder / subsequent volume once a signal has been detected. When this ‘reminder’ volume has been set, you just need to press the control knob and the volume will be lowered to your pre-set volume.

Note: If you like to play loud music, make sure that you set the volume loud enough to be heard whenever a signal is detected.

Alert Tone

Whenever a signal is detected, the V1 will sound different alert tone to indicate the different types of signals detected. For X band, a ‘Beep’ will be heard, for K a ‘Brap’ and Ka band a ‘Brap-brap’ sound will be heard.

As you come close to the source of the signal, the Beeps (or Braps) will become more frequent until they merge into a continuous tone. If you look at the V1 at this time, you should see the radar. The Beside arrow and then the Behind arrow will glow as you pass the radar.

In the case of multiple signals being detected, the audio warning will always monitor the greatest threat.

If you want to mute the audio once a signal is detected, you can do so by simply pressing a button.

Note: If you are driving on hilly and curvy roads, the detection range will be shorter as the signal is blocked. Hence, when driving along these kinds of road conditions, pay full attention and be alert. Once a signal has been detected, take immediate action and slow down as the detection range is relatively shorter.

False Alert

Valentine One is designed to recognize — and ignore —phony radar signals from poorly-designed detectors. Occasionally a false alarm will be started before verification is certain. If it then determines the source is a junk detector, it will notify you it is retracting that alert with a “Dee-Dah-Doo” sound. A flashing J ( ) indicating “junk” will appear in the Bogey Counter.

Remote Audio Adapter

Valentine One radar laser detector

Click to enlarge image

 

 

This module adapts Valentine One for the following installations:

  • Provides remote control of on/off, volume, muted volume, muting, and computer mode.
  • Provides remote speaker.
  • Provides headphone mini jack 3.5mm (1/8″).
  • Provides micro jack 2.5mm (3/32″) for additional remote speaker.

Caution — Improper installation may damage equipment.

Radar Strength Indicator

When a signal is detected, the radar strength indicator will show the strength of the radar. The stronger the signal, the more LEDS will be lighted up and the vice versa when a weak signal is detected.

Valentine One Review – Sensitivity Mode

Valentine One best buy

You can set the sensitivity of V1 to All-Bogeys mode, Logic or Advanced mode.

Under the All-Bogeys mode, all threats will be reported as soon as they are detected. You need to use your own judgment to decide whether or not they are real threats.

In Logic mode, the computer will judge the threat level of the X-band detected. If it is a non-threatening signal, it will be reported at the “muted” volume. If they become threatening, the audio warning will be upgraded to the “initial” volume before you are within radar range.

In Advanced-Logic mode, X-band signals that the computer has reason to believe aren’t radar will not be reported at all. One exception: To be failsafe, the computer will always pass extremely strong signals along for your judgment. This mode is particularly useful in metro areas.

The computer is smart: It never operates the receiving circuits at less than maximum sensitivity and it knows that Instant-on is a greater threat than ordinary radar. So it will always warn you immediately at the “initial” volume when those radars are detected, no matter what mode you’ve selected.

To change modes, press and hold the Control Knob for one second.

Concealed Display / Dark Mode

The Concealed Display Kit (optional) makes Valentine One less noticeable to others outside your car. It allows you to operate Valentine One with its lights blacked out, yet have a fully operational display module down low in the car where it’s not visible outside.

Traffic Monitor Filter

Increasing more and more states are using traffic monitor system to monitor traffic and this system will cause a lot of false alarms to V1. To overcome this problem, just turn on the Traffic Monitor Filter and this problem will be solved.

Do take note that although the Traffic Monitor Filter is installed in the unit, it is not activated. For activation instructions, go to the website at http://www.valentine1.com/Lab/techreport3.asp

Because K-band POP-radar protection is switched off when Traffic Monitor Filter is enabled, it is suggested to retain the factory setting if this system is not operating in your area. Ka-band POP Protection is not affected by Traffic Monitor Filter.

How do you know if Traffic Monitor Filter is enabled? During the start-up sequence, just after “P…O…P,” the symbol “t ” will appear if Traffic Monitor Filter is enabled.

Mounting

Valentine One detector

 

When mounting the V1, it is best to place it at the center of the vehicle and as high up as possible. Make sure that nothing i.e. wiper is blocking the direction or the view of the V1 to ensure its effectiveness in detecting signal.

Dimensions and Weight

4.5 in. L x 3.6 in. W x 1.0 in. H; 6.4 ounces

What’s in the Box

  1. Valentine One Radar Locator
  2. Windshield mount
  3. Visor mount
  4. Lighter adapter
  5. Power cord, coiled
  6. Power cord, straight
  7. Spare suction cups
  8. Direct-wire power adapter
  9. Wiring-harness connector
  10. Owner’s Manual
  11. Spare fuse

Is Radar Detector Legal?

Radar detectors are completely legal to use in non-commercial vehicles in 49 states. Virginia and Washington D.C. are the only places in the United States that currently ban radar detectors. Radar detector use in commercial vehicles has been prohibited in the U.S. since 1995 and radar detectors are also illegal in most Canadian provinces.

Valentine One Review – Customer Reviews

At the time of this writing, the rating for V1 stand at 4.1 out of 5 stars which is a very good rating. There are many 5 and 4 star ratings while only a few low 1 star rating.

Pros

  • Incredible detection range
  • Simple operation
  • Ability to track up to 9 threats simultaneously
  • Excellent laser detection
  • Arrows to indicate direction of signal
  • Volume control
  • Signal strength indicator
  • 3 sensitivity settings
  • One year warranty

Cons 

  • Pricey
  • No GPS and database of red light and speed cameras
  • No apps for instant alert / latest info
  • No AutoLearn feature to filter out the false alert
  • No manual lock out to filter out the false alert
  • The LED color is the same for all the different bands – Not really a major issue
  • No AutoMute feature – You have to press the know to reduce the initial alert volume
  • No stealth mode – The V1 can be detected by the radar detector detectors

Verdict

The Valentine One may have been around for awhile but its old-school thinking still remain valid today. The design may not be as contemporary as the newer design, nevertheless, what is important is its effectiveness in detecting radar and laser remain excellent.

Additionally, the arrow feature which show the direction of the signal is not found in any other detector on the market. This design is unique to V1 and will clear a lot of confusion in helping you to know the direction / source of the signal.

Although the V1 may have been updated to keep up with the latest technology, there are certain aspects that the V1 lack behind. For example, it lacks the AutoMute feature which automatically mute or reduce the alert volume; a feature that is common in modern radar detectors.

For the same price, you can actually get a radar detector with GPS function, an advance feature to lock out false alerts and to track red-light and speed cameras. For radar detectors with GPS function, check out the Escort Passport Max2 or the Escort Passport 9500ix.

If you have a lower budget and do not require GPS feature, check out the Escort Passport 8500X50.

For reviews on other top radar detectors, list of radar detectors below $100, and radar detectors with GPS feature, Click Here.

Note: Having a radar detector does not guarantee that you will not get a speeding ticket. If you have been speeding, there is always a chance for you to get a ticket. For example, if a police patrol car is following behind you and you are speeding, chances are you will get a ticket.

When choosing a radar detector, always think in terms of investment – you are putting your investment in a radar detector. Think long term and with just a couple of saves from the detector, all your investment is already paid for. 

End of Valentine One Review. 

Follow the link below to get the current price:-

Valentine One for sale

 

 

 

 

Incoming search terms:

  • how do u change into logic mode on valentine one
  • valentine v1 review

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>

  

  

  

A sample text widget

Etiam pulvinar consectetur dolor sed malesuada. Ut convallis euismod dolor nec pretium. Nunc ut tristique massa.

Nam sodales mi vitae dolor ullamcorper et vulputate enim accumsan. Morbi orci magna, tincidunt vitae molestie nec, molestie at mi. Nulla nulla lorem, suscipit in posuere in, interdum non magna.